Exp-computer CRW with USB 2.0 Cable Bedienungsanleitung

User’s Manual

- 4 -PART NAMES AND FUNCTIONS Your external CD-RW may differ slightly from the figures shown, however the controls will operate as described below

- 5 -External Type Ultra-Slim Type

- 6 -Rear Panel Of The CD-RW Drive 1. Power Button: Press this button to manually power on/off the CD-RW drive. 2. Power Jack (DC IN): Connect the

- 7 -External Type Ultra-Slim Type

- 8 -HARDWARE INSTALLATION Note: This external CD-RW should only be powered by the AC adapter provided by manufacturer, using an incorrect AC adap

- 9 -External Type Ultra-Slim Type

- 10 -SOFTWARE INSTALLATION FOR WINDOWS 98SE 1. Boot-up your computer into Windows 98SE, making sure the USB port device driver has been installe

- 11 -4. On the following screen, select ‘Complete’, and then click Next. 5. After the necessary files are copied into your internal hard d

- 12 -7. Windows will detect the external CD-RW and install the device driver automatically. After the installation, you will find a new drive lett

- 13 -SOFTWARE INSTALLATION FOR WINDOWS Me 1. Boot-up your computer into Windows Me, making sure the USB port device driver has been installed an

- 14 -4. On the following screen, select ‘Complete’, and then click Next. 5. After the necessary files are copied into your internal hard d

- 15 -7. Windows will detect the external CD-RW and install the device driver automatically. After the installation, you will find a new drive lett

- 16 -SOFTWARE INSTALLATION FOR WINDOWS 2000 1. Boot-up your computer into Windows 2000, making sure the USB port device driver has been installe

- 17 -3. Windows 2000 will install its resident device driver (USB Mass Storage Device) automatically. After the installation, this external CD-RW

- 18 -How To Update The Device Driver The Windows 2000 resident driver – ‘USB Mass Storage Device’ will work properly with the external CD-RW, you

- 19 -6. After the necessary files are copied into your internal hard disk, a screen will appear as the figure, click Finish to restart computer.

- 20 -SOFTWARE INSTALLATION FOR WINDOWS XP 1. Boot-up your computer into Windows XP, making sure the USB port device driver has been installed an

- 21 -3. Windows XP will install its resident device driver (USB Mass Storage Device) automatically. After the installation, this external CD-RW dr

- 22 -USING CD-RW WITH USB INTERFACE To Connect The USB CD-RW To Your Computer ♦ Windows 98SE/Me/2000/XP: 1. Insert the plug of the USB cable i

- 23 -♦ Windows 2000: When this external drive has been installed as ‘USB Mass Storage Device’: 1. Double-click on the icon on system tray and t

FCC COMPLIANCE STATEMENTS This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

- 24 -CD-R/CD-RW MEDIA When using the external CD-RW to record your own CDs, you can use both CD-R disc and CD-RW discs. The CD-R/CD-RW discs must

P/N: 7450350-02 Printed in Taiwan

TRADEMARKS MS-DOS, Windows, Windows 95/98/Me/2000/XP are trademarks of Microsoft Corporation. Macintosh is trademark of Apple Computer Inc. *All o

CONTENTS INTRODUCTION ... 1 SYSTEM RE

- 1 -INTRODUCTION The external CD-RW is a high performance external CD Recordable/ReWritable drive, it makes writing CDs easier, faster and more a

- 2 -SYSTEM REQUIREMENTS USB 2.0 function USB 1.1 function ! Notebook or desktop computer with USB2.0 port. ! Windows 98SE/Me/2000 or Windows XP.

- 3 -