Exp-computer ThinConnect4 Bedienungsanleitung Seite 1

ThinConnect4User ManualEXP Computer, Inc.

Chapter 8 Final Setup ... 1228.1 Save your settings...

<90> ThinConnect45.4.2 Client settings1. Double-click “My Computer” button, select “Dial-Up Networking”, anddouble-click.2. Click the “More” but

ThinConnect4 <91>Chapter 6 Leased Line Setup6.1 ISP Leased Line IP Connection6.2 Leased Line IP Connection6.2.1 Default Gateway Setup6.2.2 Stati

<92> ThinConnect46.1 ISP Leased Line IP ConnectionThis section explains the setup for ISP Leased Line IP Connection.Choose ISDN Leased Line befo

ThinConnect4 <93>6.2 Leased Line IP ConnectionThis section shows example of a point to point connection.See the following figure and set Default

<94> ThinConnect46.2.1 Default Gateway SetupThis section shows you how to setup “Detail Settings”.1. Click the “Port Usage” Tab.Choose “Leased L

ThinConnect4 <95>6.2.2 Static Routing Table Setup This section shows you how to setup Static Routing Table.1. Enter the IP address and Subnet Ma

<96> ThinConnect4Edit listed record1. Highlight the record you want to edit by clicking on it.2. Click the “Edit” button and edit the record you

ThinConnect4 <97>Chapter 7 Advanced LAN Setting7.1 Firewall - IP Filter Table settings7.2 Static routing settings7.3 Syslog settings7.4 E-Mail s

<98> ThinConnect47.1 Firewall - IP Filter Table settingSetup the Firewall - IP Filter Table is optional. ThinConnect4 can function without it.

ThinConnect4 <99>Firewall Factory default settingThe following items are the ThinConnect4 Firewall default setting.• Interdict automatic connect

ThinConnect4 <1>Chapter 1 Getting Started1.1 Feature1.2 Contents in Package

<100> ThinConnect4Listing for filter setting1. Enter a number in the “No” (number) field.The entry number represents the IP filter processing pr

ThinConnect4 <101>3. Items entry field will show. All the entry functions can be defined here.4. Item entry filed descriptions.“Action”ThinConne

<102> ThinConnect4“IP/Mask: Src.”Select IP address or Network address from the Source.Enter IP address/sub net masks bit numbers in the filed, i

ThinConnect4 <103>“Port No: Src.”Select protocol port number or service from the Source and enter the “PortNo” on the field.“Port No: Dst.”Selec

<104> ThinConnect4“Protocol:”Choose in the list box of “Protocol”.• Any: Objected for all IP frame.• ICMP: Objected for ICMP protocol.• TCP:

ThinConnect4 <105>Editing for filter settings1. Select an entry-number from the list and click it.The entry number will be displayed on “No.” fi

<106> ThinConnect4Remove filter settings1. Click on an entry number, which you want to delete from the list. The selected entrynumber will be sh

ThinConnect4 <107>7.2 Static Routing SettingsThis setup is optional. It is not necessary for the function of ThinConnect4. With thissetting, Th

<108> ThinConnect41. Click the “Static Routing” button and the static routing window will pop up. 2. Choose to use default gateway or sta

ThinConnect4 <109>Listing1. Enter IP address and Subnet MaskNote: The Network address will be defined by the combination of IP address andSubne

<2> ThinConnect41.1 FeaturesThinConnect4 is an integrating HUB, Router, and two high-speed serial interface ports.The equipment also has IP shar

<110> ThinConnect47.3 Syslog settingsSyslog is a system messages recording utility. This utility will log event and systeminformation (This is a

ThinConnect4 <111>2. Setting screen Syslog. Setting up items• Check box for “Enable Syslog Function”:Place a check in this box to enable

<112> ThinConnect47.4 E-Mail sharing settingsThis function allows multiple users to share one E-mail account. The following figureshows typical

ThinConnect4 <113>7.4.1 ThinConnect4 Setup1. Click the “E-Mail Sharing” button. 2. Place a check mark in the “Use E-Mail Sharing function”

<114> ThinConnect43. Setup a mail server connectionEnter POP3 server IP address onto “POP3 Server “ field.Enter the E-Mail account registered wi

ThinConnect4 <115>Edit listed record1. Click on a user you want to change from list.Selected registered Information will be highlighted.2. Click

<116> ThinConnect4SMTP server name of ISPThinConnect4 IP Address“User Name”registered in ThinConnect4“Password”registered in ThinConnect47.4.2 S

ThinConnect4 <117>3. Click the “General” tab, you will see the “Properties” window.This section contains the user’s information. It will be used

<118> ThinConnect4ThinConnect4 IP Address“User Name” registeredin ThinConnect4SMTP server name ofthe ISPSetup for “Netscape Communicator 4.07”1.

ThinConnect4 <119>3. Click on “Identity” and the window will be shown. This is a mail user’s information,which will be used to send and receive

ThinConnect4 <3>1.2 Contents in PackageThe following items should be included in your package.If you are missing any of these items please conta

<120> ThinConnect47.4.3 Setup E-mail programThis section describes how to configure e-mail program for sending mail to ThinConnect4user with the

ThinConnect4 <121>Notes on sending mail• Users who are using an E-Mail sharing function can not receive mail which are sentout as “Cc”. Please s

<122> ThinConnect4Chapter 8 Final Setup8.1 Save your settings8.2 Return to Default8.2 To Copy Serial Port Settings

ThinConnect4 <123>8.1 Save your settingsTo make sure ThinConnect4 configuration will take effect, this section instructs youhow to save your set

<124> ThinConnect42. Enable the serial ports by enabling their check boxes.Note: Click on “Update” to make the change immediately. Or, you can

ThinConnect4 <125>4. When this window pops up, you can click “OK” to update the settings made toThinConnect4. Otherwise, click ”Cancel”.Note: W

<126> ThinConnect48.2 Return to DefaultThis section instructs you how to load the factory default values.1. Refer 3.3.1 Start ThinConnect4 Setup

ThinConnect4 <127>8.3 Copy Serial Port SettingsIf you have successfully setup a serial port and want to duplicate all settings to the otherport,

<128> ThinConnect4Chapter 9 Connect / DisconnectTelephone Network9.1 Applications9.1.1 Web browser9.1.2 E-mail program9.2 Connection Types9.3 Di

ThinConnect4 <129>9.1 ApplicationThis section explains Internet application (Web browser and E-Mail software) setting touse with ThinConnect4.No

<4> ThinConnect4Chapter 2 Prepare for Installation2.1 Components of System2.2 Your ThinConnect42.3 How to prepare LAN2.4 MODEM/TA Installation o

<130> ThinConnect49.1.2 E-mail programSet up an e-mail application:• LAN Connection. (Do not setup as dial up connection)• Do not check the mail

ThinConnect4 <131>9.2 Connection TypesThis section describes different kinds of public telephone network connection.• Auto connectionWhen a user

<132> ThinConnect49.3 Disconnect the networkThis section shows various methods of disconnecting from the network..9.3.1 PSTN and ISDN• Automatic

ThinConnect4 <133>2. Click the “Disconnect” button corresponded to the Serial ports (1 or 2) you wish todisconnect. 3. Click the “Yes” bu

<134> ThinConnect45. If the following screen is displayed, most of the time is because of the equipment ismalfunctioned.Click the “OK” button to

ThinConnect4 <135>9.3.2 Leased LineBasically, you can not disconnect a leased line, however, you can switch off the TA’spower supply if you want

<136> ThinConnect4Chapter 10 Examples10.1 An example of the ISP <-> Head office <-> Branch officeleased line connection10.2 An exa

ThinConnect4 <137>10.1 An example of ISP <-> Head office <-> Branch office leased lineconnectionWith the configuration like the foll

<138> ThinConnect4• IP and Router settings in Head office• Setting of IP for ThinConnect4IP address: xxx.xxx.0.1 Subnet Mask: 255.255.

ThinConnect4 <139>10.2 An example with ISDNThe following figure shows RAS Server MODEM connection via the TA analog port.The IP address and RAS

ThinConnect4 <5>2.1 Components of SystemsThe following additional system components needed for setting up a Local Area Networkwith the ThinConne

<140> ThinConnect4Chapter 11 Reference Information11.1 Product Specifications

ThinConnect4 <141>11.1 Product Specifications• Hardware SpecificationCategory Item SpecificationsSerial Port Port No. 2 portsInterface V.24/V.28

<142> ThinConnect4• Serial Port Connector • Pin assignmentSignal Serial Port 19pin D-SubSerial Port 225pin D-SubDCD 1 8RXD 2 3TXD 3 2DTR 4 20G

<6> ThinConnect42.2 Your ThinConnect4l Front PanelMonitor LED: Shows ThinConnect4 working status. S1 Light when serial port 1 is sending/rece

ThinConnect4 <7>2.3 How to Prepare Your LANIn order to set up your Local Area Network with the ThinConnect4, we recommend userset up all the PCs

<8> ThinConnect42.4 MODEM/TA Installation on Set-Up PCIn order to initialize a modem to work with the ThinConnect4 properly, the ThinConnect4set

ThinConnect4 <9>2.5 Cable Connections2.5.1 Serial Cable (MODEM/TA)Use only standard serial cable provided by MODEM or TA. If the cable provided

Copyright 8 8 EXP Computer, Inc. and EXP Memory Products.All right reserved.1.00 Edition, January 5, 1999No part of this publication may be reproduced

<10> ThinConnect42.5.2 AC AdapterBefore connecting the AC adapter to ThinConnect4, make sure the power switchis off.Connect the power (round) co

ThinConnect4 <11>2.5.3 10BASE-T Cable (PC connection)Turn the PC and ThinConnect4 power off before connecting the Ethernet cable.1. Use 10BASE-T

<12> ThinConnect4Troubleshooting the Link RX LED• Make sure there is power to the ThinConnect4 and PC.• Check if the RJ-45 connector on both end

ThinConnect4 <13>2.6 Windows 95/98 Settings for LAN ConnectionThis section applies to all PCs connect to ThinConnect4.In order to connect to the

<14> ThinConnect42.6.2 TCP/IP protocol installationWindows 95/98 CD-ROM requiresDuring the TCP/IP protocol installation, you will need Windows 9

ThinConnect4 <15>3. On the window below, choose Microsoft in Manufacturer and TCP/IP in NetworkProtocols and click “OK”.4. Verify if the TCP/IP

<16> ThinConnect42.6.3 TCP/IP Settings1. Choose “TCP/IP -> Ethernet card name” and click on “Property”.2. Click “IP Address” Tab and click “O

ThinConnect4 <17>4. Click the Gateway tab.In the “New gateway”, put in the ThinConnect4 IP address (Default 192.168.0.1).Click the “Add” button.

<18> ThinConnect45. Click “DNS Configuration” Tab and click “Enable DNS” button.Enter each of the following contents:• Host: PC Host Name (P

ThinConnect4 <19>6. Enter DNS Server settings and click “Add” button.Note: Data example in this window is for reference only.7. The DNS IP addre

EXP Computer, Inc.EXP Memory Products.Program License AgreementREAD THE FOLLOWING TERMS AND CONDITIONS BY OPERATING THEEQUIPMENT INDICATES YOUR ACCEPT

<20> ThinConnect4Chapter 3 Basic Setup 3.1 Installing ThinConnect4 Setup Utility 3.1.1 Before Installation 3.1.2 Installation 3.2

ThinConnect4 <21>3.1 Install ThinConnect4 Setup UtilityThe ThinConnect4 Setup is a utility program helps user configure ThinConnect4’s varietyof

<22> ThinConnect4Click “Install” button.3. Insert the ThinConnect4 diskette into the drive and click “Next” button.4. The “Add/Remove Program”

ThinConnect4 <23>Follow instructions on the screen. The setup is completed when the following window isdisplayed. Click “Finish”5. To start the

<24> ThinConnect43.2 Setup Road MapSince the ThinConnect4 have different types of connections, user should consult theillustration below and pro

ThinConnect4 <25>3.3 Common Setup3.3.1 Start the ThinConnect4 Setup UtilityClick “Start” button on task bar and select Program ->ThinConnect4

<26> ThinConnect42. All ThinConnect4(s) connected with the LAN will be searched and listed.3. If the setup utility cannot find any ThinConnect4,

ThinConnect4 <27>ThinConnect4 can not be foundFollow some of these steps, which may help you trouble shoot:Check the RJ-45 connectors for the PC

<28> ThinConnect43.3.3 Nickname Setup and Firmware VersionNickname Setup1. After finishing the setting from 3.3.1 Start the ThinConnect4 Setup U

ThinConnect4 <29>3.3.4 ThinConnect4 SettingsThis section describes how to setup ThinConnect4 IP address and details setting for LANstatic routin

<30> ThinConnect4Add ThinConnect4 to existing LANIf you are adding ThinConnect4 to an existing LAN which IP address setting is differentfrom Thi

ThinConnect4 <31>3. If all information is correct, click the “OK” button.The value in the window is just anexample. Please enter yourproper sett

<32> ThinConnect4Changing and Verifying ThinConnect4 IP AddressIf for any reason you wish to change and/or verify the ThinConnect4 IP address, y

ThinConnect4 <33>3. If all information is correct, click the “OK” button.The value in the window is just anexample. Please enter yourproper sett

<34> ThinConnect43.3.5 DHCP Server SettingsDHCP( Dynamic Host Configuration Protocol) Server provides a dynamic IP address toPCs connected to th

ThinConnect4 <35>3. We recommend user to select “Use DHCP Server Function”.Otherwise, clear the check mark on “Use DHCP Server Function” and cli

<36> ThinConnect44. Enter the DNS Server IP Address both Primary and Secondary (if your ISP have morethan one server) then fill in the Domain na

ThinConnect4 <37>3.3.6 Password SettingsTo prevent unauthorized changing of ThinConnect4’s operation or parameters, werecommend setting up a pas

<38> ThinConnect43.3.7 Options for Serial PortThinConnect4 has seven basic connecting functions as listed below:• ISP Dial-Up IP Connection • IS

ThinConnect4 <39>Serial Port settingUser needs to configure the two high-speed serial ports for usage. Follow step below:1. Serial port connecti

EXP Computer, Inc.EXP Memory Products.Non-transferable Limited WarrantyEXP Computer Inc., and EXP Memory Products ("EXP") warrants that the

<40> ThinConnect43.3.8 Settings for MODEM/TA connectionSelecting your telephone systemClick on the telephone system type.• PSTN: Circuit Switche

ThinConnect4 <41>Register a Modem with ThinConnect4In the “Change Display” below, there are “Browse…” and “Windows” buttons to help youregister

<42> ThinConnect42. Click “Windows..” to register a modem from Windows 95/98 or Windows NT modemlist. Select your modem manufacturer from the li

ThinConnect4 <43>Change DisplayThere are three buttons on the ‘Change Display’ to help you select and register aModem/TA with the ThinConnect4.

<44> ThinConnect4Extra AT commandsThe extra AT Command may be enter in the Extra AT Command filed show below: Note: The AT command entered

ThinConnect4 <45>3.3.9 DTE SpeedThe DTE speed also known as Terminal speed which ThinConnect4 serial portscommunicate with modem. Click on “DTE

<46> ThinConnect43. Please select a proper MODEM/TA communication speed (Terminal speed,DTE speed).End of Basic setup- - - - - - - - - - - - - -

ThinConnect4 <47>Chapter 4 Dial-Up IP Connection Setup4.1 ISP Dial-Up IP Connection4.1.1 Connection Settings4.1.2 Address Translation4.1.3 Deta

<48> ThinConnect44.1 ISP Dial-Up IP ConnectionThis section explains how to setup an ISP (Internet Service Provider) dial-upconnection. For deta

ThinConnect4 <49>2. Enter your user ID and password ISP in “User Name” field and “Password” filedrespectively.Note: For security purpose, the pa

<50> ThinConnect4Internet Application settingYour Internet application needs to be configured before using with it ThinConnect4.Follow the instr

ThinConnect4 <51>Setting for e-mail program:• Choose LAN connection. (Do not setup as dial-up connection)• Do not check the mail frequently.Inte

<52> ThinConnect44.1.2 Address TranslationThis section explains two types of the IP address translation available as a part of the manyfeature o

ThinConnect4 <53>2. To setup the “Translation Table”, pull down the “Aging Time” list box andchoose a time period.What is Setup Aging Time?The “

<54> ThinConnect44.1.3 Detail Settings of IP MasqueradeThis setup is optional and only needs to be done if IP Masquerade is selected.This functi

ThinConnect4 <55>1. Enter the entry number in “No” field. (Maximum entry is 32) 2. Click the “Add” button after entering the entry number.

<56> ThinConnect44. Under the “Translation Table” section, click “Protocol”, and choose the type ofprotocol.5. Enter the port number in the “S

ThinConnect4 <57>Setting Example Assume the IP address of target PC is 192.168.0.100. Following field will be shown.Example 1: If you are settin

<58> ThinConnect4Editing the setting1. Select the entry number from the list you wish to edit.Selected entry number will be displayed on “No.” f

ThinConnect4 <59>Remove the settings1. Select the entry number, which you want to delete from the list and click thenumber. Selected entry numbe

FCC COMPLIANCE STATEMENTSThis equipment has been tested and found to comply with the limits for a Class B digitaldevice, pursuant to Part 15 of the FC

<60> ThinConnect44.2 ISP Networking Dial-Up IP ConnectionISP Networking Dial-Up IP Connection service is one of the functions which is providedb

ThinConnect4 <61>About Authentication • Dial out and receive calls.The ISP confirms whether the Dial-Out authentication data and the authenticat

<62> ThinConnect43. Please enter the authentication information and telephone number to Dial Out.Enter your user ID you received from ISP in “Us

ThinConnect4 <63>4.3 Networking Dial-Up IP ConnectionSetup for private Networking Dial-Up IP Connection becomes a similar function of Remote Sit

<64> ThinConnect43. Please enter the authentication information and telephone number to Dial Out.• Enter user ID you received from ISP in “User

ThinConnect4 <65>4.3.2 Static Routing Table SettingsThis section contains instructions on how to setup Static Routing table.1. Click the “Static

<66> ThinConnect43. Click the “Add” button to add the setting to list.The value in the above window is for reference only. Enter theappropriate

ThinConnect4 <67>Edit listed record1. Click once to highlight the record you wish to edit.2. Click the “Edit” button and make the change.3. Afte

<68> ThinConnect44.4 Connection TimerThis section explains the setup procedures for “Connection Timer”.Click on the “Connection Timer” Tab.4.4.1

ThinConnect4 <69>4.4.2 Automatic disconnectionSetting the automatic disconnection. There are two types of setup available.ll Non Activity Timers

Table of ContentsChapter 1 Getting Started... 11.1 Features ...

<70> ThinConnect4Setting up “Set Non Disconnect Timer Period”User can stay connected with ISP by specify the time period based on the PC’s time

ThinConnect4 <71>Chapter 5 RAS IP Connection Setup5.1 RAS Client Dial-up IP Connection5.1.1 Connection Settings5.1.2 Call Back Function5.1.3 IP

<72> ThinConnect45.1 RAS Client Dial-Up IP ConnectionThinConnect4 (set up as a RAS client) connects to a remote RAS server by using PSTN andISDN

ThinConnect4 <73>2. Enter the user name on the “User Name” field.Enter the password on the “Password” field for this user name.Note: For securi

<74> ThinConnect45.1.2 Call Back FunctionThis section explains how to set up the call back function. The following are availablefunctions:ll No

ThinConnect4 <75>ThinConnect4 ClientPlus! ServerThe ThinConnect4 will perform the following steps if ThinConnect4 client settings aredifferent w

<76> ThinConnect4No Call Back• Leave “Use Call Back” unchecked.Call Back of “Preset in RAS Server”• Check the “Use Call Back” check box.• Choose

ThinConnect4 <77>5.1.3 IP Address Acquiring/ AssigningIf you are connecting to a RAS Server, there are two methods of assigning the IP addressfo

<78> ThinConnect45.1.4 Address TranslationThis section explains the IP address translation setting for ThinConnect4.The ThinConnect4 utilizes tw

ThinConnect4 <79>5.1.5 Detail settings of IP MasqueradeThis setup is optional you can proceed if necessary.This setup is the same as the ISP Dia

Chapter 4 Dial-Up IP Connection Setup ... 474.1 ISP Dial-Up IP Connection ...

<80> ThinConnect45.2 RAS Server IP ConnectionThe following figure is a typical RAS Server IP Connection:5.2.1 Connection Types (Setup IP Address

ThinConnect4 <81>2. Enter IP Address in “RAS Server IP Address” and “RAS Client IP Address”. Do not to overlap another IP Address. But, it is

<82> ThinConnect45.2.2 Client Access/Call Back1. Enter the name in “User Name” field.Enter the password in “Password” field.Type your password a

ThinConnect4 <83>No Call back• Uncheck “Accept Call Back” and leave it as it is.Call back for “Set by RAS Client”Check the “Accept Call Back” c

<84> ThinConnect43. When finishing your Call back setting, click the “Add” button.The record will be added in the box. Note: To edit or r

ThinConnect4 <85>Windows NT 4.0 Standard Dial-Up ConnectionNo Call backPreset inRAS ServerSet byRAS ClientDisablePPP LCP extensions (No Call bac

<86> ThinConnect4Edit listed record1. Highlight the record you want to edit by clicking on it.2. Click the “Edit” button and edit the informatio

ThinConnect4 <87>5.3 Connection TimerThis setup is the same as in ISP Dial-Up IP Connection. Please refer to4.4 Connection Timer (Page 68 to 70)

<88> ThinConnect45.4 Windows NT 4.0 Authentication SettingsWhen connecting to a Windows NT 4.0 system and the ThinConnect4 set up as a RASclient

ThinConnect4 <89>4. Click the “Network” button.5. Choose the “Allow any authentication including clear text” button of “Encryptionsettings” and