Exp-computer CRW with CDROM Card Bedienungsanleitung PDF herunterladen (Seite 22)

- 16 -

SOFTWARE INSTALLATION FOR DOS/WINDOWS 3.1

Automatic Installation

Follow the instructions below to proceed with automatic installation.

1. Insert the device driver diskette into a floppy disk drive on your computer.

2. Change the working directory to the floppy drive containing the device driver diskette by typing A:

then press ENTER.

3. At the DOS prompt (A:\>), type INSTALL followed by the ENTER key.

4. Press ENTER or click OK button to continue. The screen will display as the following:

1) Directory to install driver: Type the

directory that you want the driver files

are copied to, and then press the TAB

key to forward to the next field.

2) DOS directory: To specify the

directory containing the file

MSCDEX.EXE. Type the directory,

then press the TAB key to forward to the next field.

3) Set I/O port to: The default setting is (170-177, 376-377). Set to (168-16F, 36E-36F) is

recommended. Press the TAB key to forward to the next field.

4) Set IRQ to: The default setting is 15. Set to 9, 10, or 11 is recommended.

5. After completing the selection, press TAB key to the Install button, and press ENTER to continue.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Keine Kommentare

Exp-computer CRW with CDROM Card Bedienungsanleitung Seite 22